Negative Temperature Calibration Bath

Negative Temperature Calibration Bath

Product Details:
  • Application: NEGATIVE TEMPERARTURE CALIBRATION PURPOSE
  • Minimum Order Quantity: 1 Unit

Low Temperature Calibration bath is widely used in Calibration Lab, R D, QC divisions, Pharmaceutical divisions.

Standard Specification
Model: Floor / Table top type
Temperature range: -80°C / -40°C/ -20°C to Ambient
Temperature control accuracy: +/- 0.1°C / 0.01°C
Temperature Uniformity better than 0.05°C
Ambient Temp. Recommended: < 30.0°C
Display resolution Control Sensitivity of 0.1°C / 0.01°C up to -99.99°C thereafter 0.1°C
Control Readout for Actual and Set point
Digital Microprocessor based PID, temperature indicator cum controller
Temperature Sensor Pt 100 (RTD)- 3 wire, Class A
Stirrer to Maintain temperature uniformity
Automatic High temperature cut off: 2.0°C
Facility to drain liquid
Heating by Stainless steel Immersion heater with proper cold zone to control set point
Deviation alarms for High or Low tempertures with visual indication
Inner tank made of Stainless steel 304 grade dully polished
Outer made of Mild steel CRCA sheet with powder coating
Insulation by High density PUF – poly urethane foam / Foam sheet to avoid temperature loss
Lid with sensor probe inserting port holes, thermometer insert hole
CFC free Single stage refrigeration system for Cooling up to -40°C
CFC free double stage (Cascade) refrigeration system for Cooling below -40°C
Hermetically sealed Emerson make compressor
CFC free Refrigerants - R134a, R404a, Suva 95
Fin and tube air cooled type condensor
Liquid to be used: IPA / Methanol
Wheels for easy moving (for floor models)
Power supply: Single Phase – 230VAC, 50Hz

Optional features
Voltage stabilizer for refrigeration system
Glass Thermometer
NABL Certified Calibration Certificate
PC interface through RS232 Communication module for data logging
Temperature controller with 0.01°C display resolution
Low Temperature Calibration bath also available as per customer requirements.

Click for stardard models

Note: For continuous development the above technical specification design, SGS reserves rights to change without any prior notice.
Additional Information:
  • Item Code: SGS05LCB
  • Pay Mode Terms: Other
  • Port of Dispatch: CHENNAI
  • Delivery Time: 4-6WEEKS

Low Temperature Dry Block Calibrator

Approx Price: Rs 11 / Unit 
Minimum Order Quantity: 1 Unit
Product Details:
  • Brand: SGS
  • Display Type: Digital
  • Model: SGS 26 DBC01

Dry block calibrator are widely used in Calibration labs, Pharmaceutical divisions, Thermal plants, metallurgical plants, cement plants, Fertilizers divisions, etc.

Standard Specification for
Low temperature Dry block - DB01
Model: Table top - Portable
Temperature range -25°C to +100°c
Temperature control accuracy: + 0.2°C
Ambient Temp. Recommendation < 30°C
Display resolution Control Sensitivity of 0.1°C
Control Readout for Actual and Set point
Digital Microprocessor based PID, temperature indicator cum controller
Temperature Sensor PT 100 (RTD)type
safety cut off for heater Whenever sensor fails
Insulation: PUF - poly urethane foam
Outer dimension: 22mm diameter x 120mm
Standard Insert
Insert dimension: 21.6mm diameter x 120mm
Insert material: Aluminum
No. of Bores in Insert: 4
Bore dimension: 3.5mm, 5mm, 6.5mm, 8.5mm
Heating and Cooling: By Thermo Electric Coolers
Cooling time: 15 min (From ambient to -25°C)
Heating time: 10 min for 100°C
Power supply: Single Phase – 230VAC, 50Hz
Power Consumption: 250W

Standard Specification for
High tempertature Dry block - DB02
Model: Table top - Portable
Temperature range: 200°C to 1200°C
Temperature control accuracy: + 5°C
Ambient Temp. Recommendation: Ambient
Display resolution Control Sensitivity of: 1°C
Control Readout for Actual and Set point
Digital Microprocessor based PID, temperature indicator cum controller
Temperature Sensor N –type thermocouple
safety cut off for heater Whenever sensor fails
Heater wattage - 1750W
Heating Block Material: Ceramic tube
Insulation by Ceramic blanket to avoid temperature loss.
Outer dimension: 140 x 140 x 300mm
Bore dimension: 36mm diameter x 120mm (D)
Standard Insert
Insert dimension: 35mm diameter x 120mm (D)
Insert material : Stainless Steel 316 grade
No. of Bores in Insert: 6nos.
Bore dimension: 3.5mm, 5mm, 6.5mm, 8.5mm, 10.5mm, 13mm
Power supply - Single Phase – 230VAC, 50Hz
Power Consumption: 1800W

Optional features
Temperature controller with 0.01 display resolution
NABL certified calibration certificate

Click here for Standard models data sheet

Note: For continuous development the above technical specification design, SGS reserves rights to change without any prior notice.
Additional Information:
  • Port of Dispatch: CHENNAI
  • Delivery Time: 4-6WEEKS
  • Packaging Details: THERMO COLE PACK SGS 26 DBC01
Looking for Negative Temperature Calibration Bath ?
© SGS Lab Instruments
Desktop Site Back to top